It is possible to define specific start and end locations for your field workers. For example, the departure location of a worker can be his home or a specific address. To change this departure location, you have two possibilities.
Start and end locations different for each day of the week.
- Go to the 'Resources' module.
- Click on the 'Field workers' tab.
- Click on '…' and 'Edit' for the required worker.
- Click on 'Working hours and start and end locations'.
- Select the week from which the start and end locations are to be changed via the date picker.
- In the columns 'Departure from' and 'Arrival at', click on the icon ''.
- Click on the button 'Add custom location'.
- Enter and select the address.
- Repeat the action for other days of the week if necessary.
- Click on the button 'Save' to set these specific address for the selected week and the following ones.
Note: If necessary, you can decide not to add a departure and/or arrival address. To do this, just click on the 'Departure from' and/or 'Arrival at' icon and choose 'No departure location' and/or 'No arrival location'.
Note: To set these specific departure or arrival addresses only for the selected week, click on the button 'Save'.
Departure and arrival locations identical for each day of the week
- Go to the 'Resources' module.
- Click on the 'Vehicles' tab.
- Click on '…' and 'Edit' for the required vehicle.
- For 'Location of the vehicle', select 'Custom'.
- Enter and select the address.
- Click on the button 'Save'.